Wood Aluminum Composite Panel are also divided according to thickness. Generally, aluminum plates are used for building decoration, electrical equipment, etc., of course, they are also used in chemical and manufacturing enterprises, and are also classified according to different classifications. The requirements of the aluminum plate for its material directly affect the scope of use. According to different specifications, there are different material requirements. In terms of thickness, length, etc., it needs to be customized. When the aluminum plate is clean, no surface is clean. Corrugated, bubbling, shelter, scratches, request quality inspection report, quality assurance certificate, international quality certification, manufacturers with these are regular manufacturers, can guarantee product quality, the same price than quality, the same quality than the price .
In the industry, the industry is also keen on the Wood Aluminum Composite Panel to pass different patterns through advanced computer photo-printing technology, printing color ink on the transfer paper to print various imitation natural patterns, and then indirectly replicate on the Wood Aluminum Composite Panelby thermal transfer technology. A variety of imitation natural patterns. This is an operation that prevents oxidation after the aluminum plate is fabricated. The specifications and material requirements of the aluminum plate are not only visible in appearance, but some such problems may occur in the field. For example, the appearance of the wallboard should be neat, and the non-decorative surface does not affect the damage of the product. The appearance quality of the decorative surface should meet the relevant technical requirements.
When preparing the test piece, it should be considered that the performance of the decorative surface of the product is required to be consistent in the longitudinal and transverse directions. In addition to the performance of the decorative surface, the other requirements of the product in the longitudinal, transverse and frontal directions are also consistent. The preparation position of the test piece shall be in the area within 50 mm from the edge of the product. Aluminum plates are made according to different materials and different requirements and specifications. When ordering, customers need to strictly follow such requirements, and give the regular manufacturers a production opportunity.